PRO Series | Azden PRO Shop

Battery Doors & Covers

Sun, 15 Sep 2013 16:53:47 +0000

Please select model for the Battery Door (cover) you need from the drop down box located next to the photo above.

NOTE: If you do not find your model, please call Azden support: 973 810-3070 or use our CONTACT PAGE.

]]>

Belt Clips

Sun, 15 Sep 2013 17:00:23 +0000

Please select model for the Belt Clip you need from the drop down box located next to the photo above.

NOTE: If you do not find your model, please call Azden support: 973 810-3070 or use our CONTACT PAGE.

]]>

LC-1 Lapel Clip

Sun, 15 Sep 2013 17:01:34 +0000

Lapel clip for all Azden EX Series lapel microphones. Attaches to the collar of the lapel microphone.

]]>

LC-1T Lapel Mic Wire Clip

Wed, 13 May 2015 20:09:23 +0000

Replacement lapel clip for lapel microphones that come with most PRO series belt-pack transmitters. This style clip attaches to the lapel microphone’s wire.

]]>

MX-1: Mini to XLR Adapter Cable

Sun, 15 Sep 2013 02:39:53 +0000

Male 3.5mm stereo (dual mono) to male 3-pin XLR. Makes Azden single channel wireless receivers compatible with XLR microphone inputs. Compatible with 310UDR, 305UPR, 105UPR, 111R and WR-PRO. This cable will not work with the PRO-XD. See the MX-2 Cable.

Features

Converts mini-jack mono or dual-mono outputs to balanced XLR connection
Compatible with Azden’s single channel UHF and VHF wireless receivers
2 feet in length

]]>

Shoe Mounts

Sun, 15 Sep 2013 17:16:01 +0000

Please select model for the Shoe Mount you need from the drop down menu above.

For 330UPR, 325UPR and 320UPR mounts: Select “with screws” option if you need the screws to secure the mount on to the receiver.

If you do not find your model, please call Azden support: 973 810-3070 or use our CONTACT PAGE.

]]>

Stereo to Mono Audio Output Cable

Sun, 15 Sep 2013 02:45:17 +0000

The stereo to mono audio cable is designed to carry a microphone level signal from single channel Azden wireless receivers to video cameras with a stereo, 3.5mm (mini-jack) mic input. Connectors are right angle, 3.5mm mono male to straight 3.5mm stereo male. This audio cable is compatible with WR-PRO, 105UPR and 310UDR wireless receivers.

Also compatible with any standard 3.5mm audio input, this cable can be used for other applications. When audio is sent from the stereo end to the mono end, the left and right channels are summed to a mono signal. When audio is sent from the mono end to the stereo end, the result is dual-mono, or a replication of the original mono signal on both the left and right channels.

This cable comes in two lengths. Please choose your desired length from the drop down menu.

]]>

SWC Switch Cover

Sun, 15 Sep 2013 17:20:18 +0000

WM-PRO, WR-PRO Switch Cover

]]>

WL/T-PRO – PRO Series Transmitter

Sun, 15 Sep 2013 00:26:48 +0000

The WL/T-PRO combines the WM-PRO body-pack transmitter with the EX-503 electret condenser omni-directional lavalier microphone. This is the standard 2 frequency switchable (169.445MHz and 170.245MHz) body-pack transmitter for all “PRO” series receivers. Uses a single 9V alkaline battery and comes with a belt-clip.

Features

Body-pack transmitter with EX-503 mic
Works with all Azden PRO Series receivers
2 switchable transmission frequencies
9V battery powered
Comes with belt-clip
Transmits up to 300 feet away

In The Box

WM-PRO transmitter
Belt-clip
EX-503 lapel mic
Lapel clip

]]>

WM/T-PRO – PRO Series Transmitter

Sun, 15 Sep 2013 00:31:22 +0000

The WM/T-PRO is a handheld microphone with a built-in transmitter. It transmits on the standard “PRO” frequencies (169.445MHz and 170.245MHz) and is compatible with all PRO Series receivers. The WM/T-PRO has a standby switch to mute audio and a rubberized coating to reduce handling noise. Runs on a single “AA” battery for up to 10 hours of continuous use.

Handheld mic/transmitter for all PRO Series receivers
2 switchable transmission frequencies
Powered by single AA battery
Standby and mute switches
Transmits up to 300 feet away
Rubberized coating for reduced “touch” noise

]]>